Commercial Dryer Not Heating? Common Causes and What to Check
[DRAFT — have a ULS technician review for accuracy, then add their name to reviewedBy.]
Start with airflow
Most no-heat calls trace back to airflow. Commercial dryers have safety controls that shut off the heat when air can’t move freely.
- Lint screen. Clean it. A packed screen is the most common cause.
- Exhaust vent. Check that the vent run isn’t crushed, disconnected or blocked at the outside hood.
- Lint compartment. Lint can build up behind or below the screen.
Check the basics
- Gas supply (gas dryers). Confirm the gas valve to the machine is open and other gas appliances work.
- Power (electric dryers). Electric dryers need both legs of power to heat. A tripped breaker can leave the drum turning with no heat.
- Settings and payment. On vended machines, confirm the cycle and heat setting, and that the payment system started a heated cycle.
Parts that commonly fail
When airflow and supply check out, a technician will typically look at:
| Part | What it does |
|---|---|
| High-limit thermostat | Cuts heat if the dryer overheats. Trips when airflow is poor. |
| Airflow or sail switch | Confirms air is moving before allowing heat. |
| Igniter (gas) | Lights the burner. |
| Gas valve coils (gas) | Open the valve to send gas to the burner. |
| Heating element (electric) | Produces the heat. |
| Controls | Tell the heat circuit when to run. |
Safety first
- If you smell gas, stop. Don’t operate the machine. Leave the area and call your gas utility.
- Don’t bypass safety thermostats or switches. They exist to prevent fires.
When to call a technician
Call if the dryer still won’t heat after cleaning the lint screen and checking the vent, if it shows an error code, or if a safety control keeps tripping. Have the manufacturer, model, serial number and any error code ready.
Need a Hand With Your Equipment?
Tell us what’s happening. Our team can help.
